Zenitel ICX Platform

ooap-Zenitel-logo-3x2

The Zenitel ICX-Alphacom system consists of the ICX-Core software installed on the ICX-500 or ICX-510 hardware or in a virtual environment. The ICX-Alphacom system supports over 100 standard features.

In security related systems the most widely used features are:

Calls between intercom stations
Group calls – a Public Address or paging feature from an originator to a group of intercom stations or paging amplifiers – the ICX-Alphacom system supports 250 group definitions
Call request queuing with priority levels – calls from elevators, help points or door intercoms can all be given their own appropriate priority level
Radio interfacing – audio from mobile radio networks can be distributed to a number of operators in parallel; any operator can talk back (or it is possible to build in restrictions if so required) and the other operators also hear that side of the conversation.

Guards can directly setup a call between their own intercom station and a remote station by right clicking on the remote intercom icon and selecting ‘Call Intercom’. If required this functionality can also be assigned to a double click on the remote intercom icon.

In Alarm Monitoring the following messages are displayed related to intercom station status changes:

Call Queued - parameter: Queuing station
Call Established - parameters: Originating station and called station
Call Disconnected - parameters: Originating station and called station
Call to a Private Subscriber - par: Originating station and called station
Call to a Busy Subscriber - par: Originating station and called station
Intercom Function; followed by the defined intercom function. Through the use of ‘Intercom Function’ it is possible to define a specific message for every function in the ICX-Alphacom system which is not listed above as standard. All these functions can then also be used by the OnGuard Linkage Server to trigger actions in all by OnGuard controlled systems.

Through the Linkage Server it is also possible to trigger an action in the ICX-Alphacom system on an event in another system. An example could be a voice message to an area when a video analytics ‘loitering’ event has been detected.

Icons in maps have the following appearances depending on intercom station statuses:

Idle
Connected - Station is in a conversation with another station
InQueue - Station has initiated a call request and is in a call queue
Blocked – Station is temporarily blocked by a guard from making calls
LineError - A line error to the station has been detected
OffLine - The station is off line; The state is shown when there is no data communication at all between OnGuard and the ICX-Alphacom system, all station icons will show the OffLine state
In general it is possible for OnGuard to trigger any feature which the ICX-Alphacom system supports (over 100 features are available as standard), while the ICX-Alphacom system can send information to OnGuard on any event inside the ICX-Alphacom system.

Product Information				OnGuard Certifications
Name	Model	Version	Middleware	8.0	8.1	8.2
ICX Platform	ICX-500, ICX-CORE, AlphaCom 14	1		Yes	Yes	Yes

OnGuard License Requirements:
Component	License Option	Part Number	Comments
Intercomm	Maximum Number of Intercom Exchanges (SWG-1340). (1) Intercom license PER Intercom panel. Contact your LenelS2 Value Added Reseller for pricing.	SWG-1340

LenelS2 factory certification validates only the compatibility of the OAAP product with the LenelS2 OnGuard access control security system. LenelS2 makes no representations regarding the functionality or cybersecurity of any OAAP product.